Top Water Heater Maintenance Tips

Philadelphia Water Heater Service

Your water heater is an essential part of your home. You use it to wash dishes, take showers, and clean clothes. Because you depend on it so much, it’s important to keep it in good working condition. If it breaks down or malfunctions, your home could become uninhabitable. Read on to check out the top water heater maintenance tips from Green Heating, Cooling, & Electric.

Flush Your Heater Annually

One of the most important things you can do to maintain your water heater is to flush it out. Over time, your water heater will accumulate sediment. This sediment can clog your pipes and reduce the efficiency of your heater. To prevent this from happening, you should flush your water heater at least once a year.

To flush your heater, turn off the power and the water supply. Then, open the drain valve and let the water run until it’s clear. You may need to use a plunger to get rid of any stubborn sediment. Once the water is clear, close the drain valve and turn on the power and water supply.

Check the Anode Rod

Another important maintenance task is to check the anode rod. The anode rod is a metal rod that’s located inside your water heater. Its job is to attract corrosion and protect your tank from rusting. If the anode rod is corroded, it needs to be replaced. To check it, remove the access panel and unscrew the rod. If it’s more than half corroded, it needs to be replaced. You can buy a replacement anode rod at your local hardware store.

Insulate Your Tank

Another way to extend the life of your water heater is to insulate the tank. This will help keep the heat in and prevent heat loss. You can buy an insulation blanket at your local hardware store. Be sure to follow the instructions on the packaging. If you’re not sure how to properly install it by yourself, our plumbing and water heater contractors can help.

Maintain the Temperature

You can also save energy and money by maintaining the temperature of your water heater. The ideal temperature is between 120 and 140 degrees Fahrenheit. You can adjust the temperature by opening the access panel and adjusting the thermostat. In many cases, you may even be able to keep it a lower temperature. This will save you money on energy bills while still ensuring that your home has enough hot water for all of your necessary tasks.

Get Regular Maintenance

In addition to the tips above, it’s also a good idea to get regular maintenance for your water heater. Our water heater contractors can inspect your system and clean it out as needed. They can also make sure that all of the parts are in good working condition. This will help prevent problems down the road and keep your home comfortable.

Contact Us for Philadelphia Water Heater Service

If you need Philadelphia water heater service, don’t hesitate to contact Green Heating, Cooling, & Electric. We can help you with all of your heating and cooling needs, from maintenance to repairs to replacements. Give us a call today!



Request Service