5 Tips to Prepare Your HVAC for Summer

4 Signs Your HVAC Needs Maintenance

HVAC Repair in Philadelphia

The summer season is always hard on your HVAC unit. After all, the hotter it gets outside, the more energy your air conditioner uses to keep your home cool and comfortable. The air conditioning system is an essential part of your home because it is very difficult to live without it in this hot and humid weather. You may need HVAC repair in Philadelphia to prepare for the summer. So, if you have an HVAC system, you must keep it in good working condition. Here are five tips to help you prepare your HVAC system for the summer season.

1. Check the Filter

The first thing you should do is check the filter because if it is dirty, your unit will have to work harder than it needs to. The easiest way to check out whether your filter needs changing is by simply lifting it and seeing if there are a lot of dust particles underneath it. If you do notice a lot of dust under the filter, it will have to be changed. Changing your filters often will allow your HVAC system to last longer and work better.

2. Check for Visible Dents or Cracks

For the system to function properly, it needs to be installed well. To do this, you will need a lot of knowledge about how the unit is supposed to work. Some small things can affect the operation of your air conditioning system. For example, when a dent or a crack on an inner part of the unit comes to light, this can affect airflow and thus overheat other parts of the air conditioning unit. This can cause your unit to be less efficient and may need repairs. It is better to check for any damage that the system may have and get it repaired if it is too much.

3. Keep It Clean

The next thing you need to do is keep it clean because, in this hot weather, dirt from outside will get inside your house and stick to the AC unit. If it gets dirty, dust particles will stick to the filter, which means that you will have to clean your air conditioner more often. By keeping your AC clean, you will reduce the chance of dirt accumulating on the unit, and thus, you will also be able to clean your AC more easily and in a shorter duration of time.

4. Change Your Air Filters Often

As we have already mentioned before, one of the most important things you can do is keep your air filters clean. This is important because dirty filters can slow down the unit’s performance and make it inefficient. So, change them at least every month, if not more often. While preparing for summer, make sure that you have a few extra filters ready so that if you have to clean one, you can install the new one right away.

5. Have It Professionally Serviced

The last tip is to have your air conditioning system professionally serviced at least once a year. In most cases, this will eliminate any unnecessary problems that may come up during the summer months. Some of the most common repairs that air-conditioners need are leakage repairs and installing or replacing new parts. Call our professional servicing company to nip these problems in the bud.

Contact Us Today

 If you need HVAC repair in Philadelphia, Green Heating, Cooling, & Electric boasts excellence with every job we do. Call us today for more information or to request your free estimate. 

History of the Modern HVAC

Your HVAC System in Philadelphia and Pests

HVAC Repair in Philadelphia

If you’re a resident of Philadelphia, then you know how important it is to have a reliable HVAC system. Unfortunately, HVAC systems don’t last forever, and eventually, they will need to be repaired or replaced. When that time comes, you want to make sure that you find the best HVAC repair in Philadelphia at Green Heating, Cooling, & Electric. But just how did HVAC systems originate? 

The Origins of the HVAC System

The HVAC system is one of the essential components of any modern building. It keeps us comfortable in our homes and offices by regulating the temperature and humidity. It may seem like a contemporary invention, but the history of the HVAC system goes back centuries.

The history of HVAC (heating, ventilation, and air conditioning) can be traced back to the Industrial Revolution. This was when factories began using large amounts of coal to power their machinery. The resulting smog and pollution led to the development of technologies that would help improve indoor air quality. One such technology was the central heating system, which allowed for year-round temperature control, no matter the season. This led to the development of modern HVAC systems that we use today.

The First Air Conditioner 

Before central heating and air conditioning, people relied on fireplaces, wood stoves, and other devices to heat their homes in the winter. This was not only inefficient, but also dangerous: these devices started many house fires. In the summer, people tried to stay cool by opening windows and keeping cool drinks on hand. This was also not very effective. The solution came in 1902, when a man named Willis Carrier invented the first modern air conditioner.

Carrier’s goal was to improve the quality of the air inside factories. He accomplished this by using a process he dubbed “air conditioning.” This term referred to the process of removing heat and controlling the humidity of indoor air to create a more pleasant indoor atmosphere. In 1933, the Carrier’s company developed an air conditioner with a belt-driven condensing unit, a blower, mechanical controls, and an evaporator coil. The device went on to become the standard in the US air-cooling market.

Although modern air conditioners still operate on the exact underlying science as Carrier’s 1933 system, scientific breakthroughs in energy efficiency, electronic sensors, diagnostics and controls, and vapor compression have made them even more effective. 

Modern HVAC Systems in the US

According to the Energy Information Administration, almost 80% of American households now have air conditioners, most of which are central systems. Air conditioning has evolved from a luxury to a necessity, and it has improved the quality of life in America in a myriad of ways. HVAC systems are an essential part of our lives, keeping us comfortable in all kinds of weather conditions, and it is hard to imagine a world without these life-saving systems.

HVAC Repair in Philadelphia

Like any other system, the HVAC system has issues that occur every once in a while. Don’t worry whether it’s a minor problem or a significant issue. When it comes to air conditioner HVAC repair in Philadelphia, think Green Heating, Cooling, & Electric. Contact us today for a free service estimate. 

The Benefits of a Local HVAC Company

HVAC Repair in Philadelphia

There are various challenges involved in running a home, and one of the major ones is using an HVAC system. While these resources are important for the functionality and value of your home, they are sometimes prone to various issues. Fortunately, you might have various other solutions with our local HVAC repair in Philadelphia, such as cheap repair and maintenance services. Below are some of the other benefits of our local HVAC company.

Affordable HVAC Repair Services

Local HVAC companies have the ability to offer affordable services. It is extremely easy for us to get to your location and address all of your heating needs. However, the same doesn’t apply when you want a service provider out of state or any reasonable distance. With access to a local HVAC repair in Philadelphia service provider, the cost decreases significantly. With the proximity factor in your favor, you can also leverage better fees to access HVAC repair services. The reason is that HVAC services will be in a better position to address your needs and suggest solutions for the repair process.

Competent Service Providers

A local HVAC company is also an excellent alternative to  DIY projects or hiring a handyman. The DIY alternative is time tasking, dangerous, and can easily cause long-term damage to your HVAC. You can get injured, cause damage to the unit, or even have to take a huge portion out of your productive daily schedule. We ensure you access competent professionals who can deliver value for your unit. Specifically, a good HVAC company provides guarantees such as:

  • Access to licensed and trained technical professionals.
  • Evidence-based techniques of HVAC repair and maintenance solutions.
  • Reliable customer support team members who provide consultation services.

Optimal Value for Money

You also benefit from getting optimal value for your money when working with a local HVAC company. The reason is that such a service provider has the skills, competence, and solutions to deliver value for your organization. The transparency between you and the service provider improves because of proximity. You can easily hold the company accountable for any issues that come up after receiving the services. In addition, you can also visit the facility when your HVAC unit requires advanced repair procedures. Usually, most HVAC firms reserve their technical resources in firms with access to tools such as computer-guided repair machines.

Fast Responses

The quality of responses you receive when addressing your HVAC issues is important, and this is why our local HVAC service is perfect. You will receive fast responses from a competent HVAC service provider each time you have questions. You will encounter various challenges when using an HVAC system or service.

With our local HVAC repair in Philadelphia experts, expect to find it easy to consult with the customer support team of your preferred company. Usually, our HVAC company lets you contact the support team through various avenues on social media such as Facebook or Twitter. Or, you can also make a direct phone call to consult directly with a well-trained customer support team professional.

Contact Green Heating & Cooling

There are numerous benefits of investing in a local HVAC company over similar alternatives. A local HVAC company like Green Heating & Cooling arrives at your destination fast, and they also provide much more manageable customer support fees. If you face challenges with your HVAC unit, contact our team today for fast insight and responses.

Does My Water Heater Need to Be Repaired?

How to Get a Fair Compensation from a Car Accident

Water Heater Repair in Philadelphia

One of the most important components of your home is its water heater. This device will allow you to utilize warm or hot water for washing or cooking purposes. Water heater repair in Philadelphia is available at Green Heating, Cooling & Electric. We’re verified and trusted in the area, and we have a long list of satisfied customers. Find out if your water heater needs to be replaced with these helpful hints. 

Signs That You Need Water Heater Repair

Leaks

There are some common signs if your water heater is on its last legs, so to speak. One of the first things to look for are leaks. Some of the sure signs for leaks are increased moisture around the tank or puddling underneath the base of the tank. Another indication of leak damage can be seen on the side of the tank via water corrosion. Pressure buildup inside the tank tends to produce leaks. Too much pressure inside of the tank can be disastrous by causing an explosion.

We offer water heater repair in Philadelphia to remedy this problem, and our technicians have been thoroughly trained. In addition, we can provide repair services for commercial-based water heaters. We have over 10 years of experience, and we’re accredited by the BBB.

Relief Valve Issues

If your tank’s relief valve is not working properly, then your home’s water heater will need repair. The sound of knocking is a good indicator of an improperly working water heater. These noises are usually the result of sediment buildup inside of the tank. The knocking and rumbling sounds generally come from the hardened sediment that’s moving around in the tank. Preserving the water heater is simple – you’ll just need to flush the tank regularly to keep the heating elements functioning properly.

High Utility Bills

Is your utility bill much higher? Higher utility bills is a sure sign of water heater malfunction. This means that the heater itself is using extra energy to deliver the same amount of warm water, which will translate to higher energy costs and more zeroes on the end of your utility bill. If your bill has inexplicably increased in the last few months, it could be a sign that your water heater needs to be repaired or replaced by our professionals at Green Heating & Cooling.

Rusty Water

 If you’re seeing rusty water, then this could be an indicator that the water heater is underperforming. The discolored water may also have a metallic odor. The interior of the tank could possibly be rusting due to the corrosion of the steel lining. Discolored water could also mean that the anode rod may need to be replaced. In addition to that, cloudy water can also be an indicator of damage.

Contact Green Heating & Cooling Today

You can depend on Green Heating & Cooling to offer expert water heater repair in Philadelphia. Contact us today for more information about our HVAC services or to request a free estimate for your home or business. 

How to Use a Back-Up Generator

Your HVAC System in Philadelphia and Pests

Heater Repair in Pennsylvania

The back-up generator is a device that provides electric power for your residence. It is essential to install this device before natural disasters, or life-threatening situations occur so that you and your family will be safe from electrical dangers. The back-up generator is mainly used when the primary power source fails or there is a power blackout, leaving you without electricity and causing you to require heater repair in Pennsylvania. 

Common Heater Problems

Heater repair in Pennsylvania can be an essential step to maintaining the working condition of your heater. A well-functioning heater is necessary during cold seasons; therefore, it is crucial to have functional heaters in your home or office. The most common problems associated with heaters are electrical and mechanical.

The typical electric problems include tripping circuit breakers, blowing fuses, and humming noises, while the common mechanical problem consists of a blocked flue and running but not heating. If the electrical and mechanical issues persist, you may need immediate heaters repair in Pennsylvania.

How to Use a Back-Up Generator

As the population continues to grow, so does the electricity demand. The increasing demand has significantly strained our power supply system. If a blackout occurs and your primary power source is not functioning, you will need a viable solution. Even if you have an uninterruptible power supply, you may want to consider installing a backup generator. Generators are generally portable, making them easy to move from place to place. The following are steps on how to use a backup generator:

  • Before using the back-up generator, check the oil, gas, and battery. These will indicate if the generator is in working condition.
  • Prepare for a power outage by having everything you need for the generator ready to use. You will need extension cords, gas cans, a battery tester, and gloves. Make sure to keep everything in an organized area to be easily accessible when needed.
  • Turn the generator switch to OFF when starting. The button should be in the center position.
  • The process of using a backup generator is easy. Load up the items that you need for your power outage and begin connecting them to the electrical system in your house or office.
  • The next step is to turn on the primary power source to supply electricity to your house or office’s electrical system, providing back-up power while using the generator.
  • When you are done using the generator, return the power source to its normal back-up status, which means the generator should be shut off.
  • Turn off the primary power source to your house or office’s electrical system at the circuit breakers.
  • The last step is to check for any leaks. If there are no leaks, you have completed using a back-up generator for your home or office’s electrical system.

Contact Green Heating & Cooling

Green Heating & Cooling is your go-to provider for heater repair in Pennsylvania. Contact our knowledgeable team today for more information about our heating and cooling systems or to request a free quote. 

How to Safely Use a Space Heater

How to Lower Your Heating Costs

Heater Repair in Philadelphia

Space heaters can warm houses and businesses of any size with ease. However, if simple precautions and safety measures are not exercised, they can significantly threaten life and property. Our team at Green Heating, Cooling, & Electric offers heater repair in Philadelphia, and can quickly repair or replace these devices. We operate a full-service, 24-hour emergency service to serve you and your family.

5 Steps to Safely Use Space Heaters

1. Type of Space Heater You Own and Where You Use It

Space heaters can be classified into different types: radiant heaters, fan-forced convection heaters, oil-filled radiators, and electric space heaters. The latter includes a variety of devices such as electric blankets, electric blankets for camping, and space heaters for children’s bedrooms that are equipped with safety features. You need to know what type of heater you own to take proper measures in using it.

2. Safety Precautions

Space heaters are grounded and equipped with safety features such as stop buttons and thermostats that prevent the device from overheating. For safety, you should never leave a space heater unattended when in use, and you should never place it in the same room as a sleeping child.

3. Size and Window Location

Space heaters should be placed 3 feet away from the window sash or outside windows. They emit heat to small distances up to 3 feet but over a broader range at wider distances. For this reason, you should never put a space heater in a room where there are curtains, drapes, or blinds that can hamper their safe operation.

4. Never Overload an Electrical Outlet

Space heaters should never be placed on a wood floor, bathroom, or other small enclosed space. Moreover, electrical cords and plugs should also be placed in areas where they are not highly walked on or near any item that may cause damage to them. We are fully licensed and insured in Philadelphia at Green Heating, Cooling, & Electric and can most conveniently repair or replace any space heater.

5. Use Space Heaters According to Instructions

Space heaters do not have a temperature control setting. Instead, they come with a temperature setting that you should adjust according to the room’s temperature. The best way to change space heaters is by putting them in one of the lowest settings and leaving them there for 20 minutes. Then, increase the heater’s setting by a few degrees and let it run for 20 minutes again. It is also advisable to conduct this test every day at the same time of day to quickly determine if anything needs adjusting or adjusting on your own.

6. Know the Safe Temperature Limit of Your Space Heater

You should always check the safe temperature limit of your heater and keep it at least 5 degrees below the safe temperature limit. If a heater is not being used for a long time or hasn’t been used recently, you should also switch it off so that heating does not occur. Our heater repair in Philadelphia, PA, is available 24 hours a day, seven days a week, so these devices are always in good condition. If your heater is malfunctioning, we’ll get it repaired in no time.

Contact Us Today

At Green Heating & Cooling, we offer heater repair in Philadelphia to ensure that your heater is serviced quickly and efficiently. Contact us today for a free estimate. 

What is a Zone Control System?

heating system repair Abington

HVAC Repair in Philadelphia

A zone control system is building automation that regulates airflow in a specific part of a building. It is beneficial in large buildings where individual room temperature control is not practical. A typical zone control incorporates all the components necessary to provide heating and air cooling in a predefined area. Zone control systems are often out of date and require repair or replacement. As with most systems, a breakdown in the system can lead to poor energy efficiency. If a problem is not detected correctly, the HVAC system cannot compensate for the issue and overheats or under-cools the air, which can be dangerous to occupants. Our team at Green Heating, Cooling, & Electric deals with HVAC repair in Philadelphia and risk assessment of the HVAC systems.

What are the Benefits of Zone Control Systems?

There are various benefits of a zone control system. The most significant advantage is that it allows for controlling the temperature in each zone, increasing the comfort level and energy savings in your home. This is done by providing individual thermostats in each location, rather than a single thermostat on the entire house.

Zone control systems can also improve indoor air quality by providing positive pressure ventilation, preventing outside air from intruding into your home, and pulling in dust from your attic or crawlspace.

Zone control systems can provide constant fresh air for a specific area. All zone control systems monitor temperature and humidity levels and make adjustments accordingly. They also isolate different parts of the building or facility, making it easier to maintain and repair zones in isolation from each other.

What Does a Zone Control System Look Like?

There are many types of zone control systems. The most common is the split system. The basic idea behind the split system is that it uses different heat sources, namely two furnaces or two heat pumps, to circulate air throughout the house. As air is pulled into one of these units, it goes through a heater and then a dehumidifier before being blown out of a ventilating fan. This system is often used in areas of the house like the kitchen, where humidity levels are higher.

In a central system, the air is blown through the ventilating fan into ducts throughout the house before going out into the rooms. In this type of system, you would have one compressor to circulate air through your home. This would save on electric costs since no two furnaces or two heat pumps run simultaneously. Some systems incorporate both a central and split system.

What Are the Indications That I Need a Zone Control System?

The most important thing to note when deciding if a zone control system is right for you is simple. Ask yourself how many rooms in your home are too far from your central heating or cooling unit to be adequately heated or cooled. The answer should be fewer than ten rooms depending on the model of your system. Your system’s trouble light should be flashing, and your thermostat shows temperatures way off of what you like. Zone control systems are often the best option for homes with more than ten rooms. If you have more than ten rooms, getting a whole house system might be more beneficial and even cheaper. Contact Green Heating, Cooling, & Electric today if you are interested in installing or HVAC repair in Philadelphia. We will be happy to help you set up a properly working HVAC system.

Contact Us Today

Green Heating, Cooling, & Electric is fully licensed, insured, and bonded. We accept all major credit cards and offer financing options as well. We provide easy-to-follow instructions on HVAC repair in Philadelphia, AC replacement services, and assistance for heat pump systems, air conditioning units, and furnace repair. Our electricians are dedicated to providing the best service possible for all your heating needs in Philadelphia. We also offer extended warranties and free home visits. Give us a call today.

Does My Historic Home Need a New Furnace?

In Pennsylvania, winter offers everything except a shortage of snow. Furthermore, it’s frigid. When a snowstorm hits, prepare your home so that you can wait it out in comfort and not concern. Here are 3 ways to prepare your home and HVAC systems in Philadelphia. 1. Keep up on Maintenance This helps to ensure that your heating system won't stop working in the middle of a storm. A broken heater makes for uncomfortable and even dangerous situations, especially for the young and the elderly, as the National Institute on Aging warns. Experts recommend servicing your heater in Pennsylvania, once a year, or at least every two years. Aside from keeping you warm, this also provides you with clean air, as the filters get changed during this routine maintenance. 2. Prep Your Pipes A report from, Insurance Institute for Business and Home Safety, states that frozen pipes pose one of the biggest damage risks, and that 37% of all frozen pipe failures occur in the basement. How do you keep your property safe from this disaster? * Insulate pipes vulnerable to the cold, especially in the basement * turn off the supply to outdoor hoses and spigots * cut the water supply for any pipe that bursts and drain it A frozen pipe will burst your warm little bubble of comfort. If it happens, call your trusted servicer for HVAC systems in Philadelphia. 3. Take Proper Precautions with Your Portable Generator Sometimes, despite all of your efforts, systems fail and you need a generator for backup. Generators are great as long as you use them properly. Risks of improper use include: * fire * electrocution * carbon monoxide poisoning To avoid these risks, take the following precautions: * run the generator in an open space outdoors * do not plug it into home outlets or wire it into your electrical system; follow manufacturer's directions *change batteries and test your smoke and carbon monoxide detectors * keep a few days of back-up fuel and keep the generator filled over ¼ tank at all times Follow these guidelines so the cold doesn’t follow you into your home. You can peek at the winter wonderland outside, with a cup of hot cocoa, from your cozy home.

Furnace Replacement in Pennsylvania

Historic homes create a one-of-a-kind and stunning architectural framework that helps to distinguish an area or community. They are excellent investments for anyone looking to live in a home with a long history. However, historic homes can come with their own set of problems. Working with HVAC professionals is especially important in historical homes because they often have unique needs. Issues with things like plumbing and electricity may arise at any time, causing you to need a furnace replacement in Pennsylvania for your historic home.

The Lifespan of a Furnace

Depending on your environment in Pennsylvania, the furnace in your historic home may be the most vital item in that home. It provides the essential warmth that you and your family require to remain safe and comfortable during the cold seasons of winter. A furnace has a 20 to 30-year lifespan. However, this does not imply that you must wait for that much to renew yours. If your furnace has been having serious difficulties and requires frequent repairs for more than 15 years, you may need to consider replacing it. Regular maintenance, such as replacing the filters and clearing the burners, can also help extend the life of your furnace.

Signs You Need To Replace Your Furnace

Here are some signs you should look out for to know whether you need a new furnace for your historic house.

Age of The Furnace

Some furnaces have a longer lifespan than others, as we have seen earlier. However, if yours is more than 15 years old, it’s a smart idea to replace it. Although it may not be necessary to update the furnace, your furnace specialist will guarantee that it would be best if you replaced it. Furnace renovation is costly, so understanding when to replace can save you lots of money. When it’s time to replace your furnace, you may want to consider converting to a different type of furnace. Consult your furnace specialist to see if switching to a different alternative is good.

Noise from The Furnace

Furnaces generate noise, but if yours is very noisy, it could signify that it needs to be replaced. Damage is inevitable, and the furnace is no longer worth fixing once it reaches a certain extent. The expenses of parts and labor are too expensive to justify. The only practical alternative at this stage is to replace the furnace. When it comes to furnace upgrades, a higher quality furnace may appear to be somewhat pricier at first, but the return on investment is several times greater. Furnaces of higher quality are more effective, require less maintenance, and last longer. Inquire with a furnace professional about the advantages of purchasing a high-quality oven over the cheapest one.

Frequent Repairs

Most furnaces do not need to be repaired regularly. At least once a year, routine maintenance should be arranged, but real repairs should be infrequent. Consider upgrading your furnace if it fails frequently. Even though the winters in Pennsylvania are cold, you should have a reliable source of heat. Keep in mind that all furnaces will require maintenance at some point during their lives. That’s quite typical. The gas oven igniter, for example, may need to be replaced, or the limit switch may have to be updated. However, it is not usual for repairs to be conducted frequently during the heating season. You should consult a furnace professional about the rationale for these repairs and whether or not you should consider a replacement.

Other signs may include:

  • Around the furnace, you notice rust, cracks, or corrosion.
  • The furnace is spewing dust, soot, or rust, particularly around the register.
  • You notice that the humidity level in your home is increasing, et cetera.

Contact Us Today

You can rely on Green Heating & Cooling for reliable furnace replacement in Pennsylvania. Contact us today for more information about our HVAC services or to request a free quote.

Imbalanced Airflow: Why Buildings Have Hot & Cold Spots

We’ve all been in buildings where the temperature and air quality suddenly shift from one room to another, or one floor to another. You might be walking through a normal hallway, only to enter a bedroom and get hit with a wall of stuffy, warm air. Or you may notice that as you walk through an apartment complex or office building in the winter, entering a certain area gives you a sudden chill that makes you want to run back the other way.

Especially when outdoor temperatures get extreme, indoor airflow is a critical comfort factor. Whether you’re at work or at home, constantly trying to moderate the temperature yourself becomes tiring and distracting – not to mention, it’s usually ineffective. 

Let’s take residential structures as an example. When your home was built, airflow should have been taken into consideration by an HVAC designer. Designers will calculate the exact cooling and heating load of each room, choosing HVAC equipment based on your unique home’s dimensions and requirements. Once this is done, your heating and air conditioning units can be installed confidently. 

The problem is, not all homebuilders and HVAC designers are highly experienced, which means there’s plenty of room for error when doing these calculations. Homebuilding is a complex process with many factors playing into the final result. Even if the workers that designed and built your home did a good job, a home could still end up with imbalanced airflow. For example, old windows may be causing major air leaks because they are not adequately insulated. 

Some common signs of imbalanced airflow include:

  • Feeling a significant temperature difference from room to room
  • Feeling like certain rooms of your home have minimal protection from outside weather
  • Having high utility bills even when you don’t overuse your system
  • Always needing to open windows or use fans to improve airflow
  • Noticing that your HVAC system is running more often than you’d like

If this is an issue in your home or workplace, it is unlikely to go away on its own. You can first try to troubleshoot the problem:

  • Make sure all registers are open, or experiment (eg. partially close first floor registers to direct more airflow to the second floor)
  • If you have different thermostats on different floors, try setting them a few degrees apart to correct an airflow imbalance
  • Go through the building and find small spots and cracks that you can fill with caulk
  • Clean your air ducts (an obvious solution, but one that is often overlooked!)

In many cases, buildings with severe airflow imbalance require professional assistance. An HVAC company can come in and assess the layout of the building, the placement of air ducts and registers, and the efficiency of your heating and cooling unit to see where upgrades can be made.

If you need help troubleshooting your electric, heating, & air conditioning issues, our HVAC professionals are on call and ready to come to the rescue – Get in touch with Green Heating, Cooling, & Electric if you need help!

How to Adjust the Humidity Levels of Your Home

heating system repair Abington

HVAC Repair in Philadelphia

Many factors can contribute to the quality of the air in your home. One factor that needs to be taken into account is humidity levels, which are affected by your HVAC system and help regulate the moisture in the air. This in turn affects how things feel and smell. When humidity levels are too low, it can cause dry skin and hair – and when they are too high, it can result in mold and mildew. Call us for HVAC repair in Philadelphia whenever you need to adjust your humidity levels.

What is the right humidity level?

If you live in a humid area, you might not need to worry about this factor as much as someone who lives somewhere drier would need to do so. Humidity levels should be kept between 30% and 70%. The most ideal is 45% since 30% is too dry and 70% is too high.

How can I check humidity levels?

1. Use an AC unit with a humidistat built-in, or install one yourself.

2. Check whether the windows accumulate fog or moisture occurring on ceilings and walls. These are signs of extremely high humidity and should be regulated.

3. Cracking and dried millwork and paint and increased static electricity are signs of low humidity levels.

4. Purchase a hygrometer to get the humidity readings of your house accurately.

How can I lower my home’s humidity levels?

1. Turn down or off the humidifier or find an HVAC repair in Philadelphia if it fails to run efficiently.

2. In the basement and during summer, it is recommended to use a dehumidifier.

3. When bathing and cooking, you are encouraged to utilize exhaust fans or open windows to allow fresh and dry air from outside.

4. If you reside in an area where homes are tightly constructed, purchase and utilize an energy recovery ventilator.

5. Make an effort to reduce the amount of water in the home by taking shorter and cooler showers, using covered pots while cooking, and venting clothes dryers to the outside directly. For plant lovers, it is imperative to reduce the number of plants in the house.

How can I raise the humidity levels?

Humidity levels drop significantly during winter because cold air holds less moisture. If a home uses air heating mechanisms, it is likely to have more problems because furnaces create hot air through combustion hence burning out most of the water vapor.

When the humidity levels are low, the most apparent solution is using a humidifier.

There are three standard types of humidifiers that one can purchase and use to increase humidity levels in a home.

They include:

1. Portable humidifier

The portable humidifier is one of the most common standard humidifiers today. The manufacturers have released two types, including; warm mist and cool mist, using a water reservoir. The cool mist is designed with a wick that absorbs water and a fan that blows through a moistened filter. As water passes through the filter, it evaporates the water into the atmosphere. On the other hand, the warm humidifier has a similar mechanism but with the addition of a heating element that warms the water before releasing it.

If your portable humidifier is not giving you the desired results, call in an HVAC repair in Philadelphia.

2. Natural evaporation

The natural way of evaporation involves placing a vessel full of water next to a heating system. You can also introduce moisture into the atmosphere by leaving wet clothes and towels out to dry.

3. Home humidifier system

This is the most reliable humidity regulation system. It involves adding the humidifier to the house furnace and setting it to have vapor distributed into the house through the duct system. This is an expensive option since it calls for the homeowner to directly install a cold water plumbing system and create room for the humidifier unit. You can use a humidistat to control the humidity levels of the entire house.

Contact Us Today

The home humidifier system is extremely complex and could need regular checks, hence the need to find an HVAC repair in Philadelphia. Contact Green Heating & Cooling today for a free quote.