Emergency Heater Repair Philadelphia

“It feels like an icebox in here! Why is my heater not working?” This is a question many of us ask ourselves at the worst times, usually in the dead of winter. Did you see the temperature this morning? It was in the single digits! Last winter was one of the snowiest seasons in Philadelphia history so who knows what could happen this year. If you have an emergency heater repair in Philadelphia call us 24/7 and we’ll get you back up and running! Emergency heater repairs in Philadelphia can be costly, but some of these repairs are preventable.

Emergency Heater Repair Philadelphia: Prevention is Key

Dirt is probably the biggest problem when it comes to heating system repairs in Philadelphia. It can negatively affect your heating system’s efficiency and waste fuel. There are three major components that should be thoroughly cleaned to optimize proper functionality: the filter, the blower, and the motor. Under normal use the furnace filter needs to be replaced at the start of each heating season and about once a month thereafter. To determine whether or not to replace the filter simply remove the filter from its housing and take a close look at it. Does it look dirty, dusty, or clogged? If yes to any of these then it is time to replace it.  By cleaning or replacing your heater’s filter, it is one of the easiest ways to avoid emergency heater repair in Philadelphia.

emergency heater repair philadelphia

Now if you are not a DIY kind of person then this next part might be a little tricky. STOP READING AND PICK UP THE PHONE! Green Heating, Cooling, & Electric is the best way to ensure your emergency heater repair in Philadelphia is done quickly and professionally! Ok, so now that we go that out of the way it is time to talk about cleaning the blower. It is very important to make sure to clean the blower assembly, belts, pulleys, and motor housing. To do so, remove access panel to get to the blower or the panel on the front of the furnace. Usually you must slide out the fan unit to actually get access to the inside of the blower (FYI grab your screwdriver because it should be held with screws).  With a brush or damp cloth, clean each fan blade and space in between blades. Next vaccuum up and loose dirt or debris and make sure to wipe down the motor housing to prevent heat buildup.

If you are lucky, the motor you have is sealed therefore no more work is necessary. If not, then your motor should have covered oil ports above the bearings near the motor shaft. Its important to lubricate the motor annually to ensure proper use.  Also make sure to check the belts while you are down there!

For more information on emergency heater repair in Philadelphia, read no further and dial 215-333-9700 and our professional and courteous staff will help you right away!

 

 

0 comments

Write a Comment

Fields with * are requierd